Tag Archives: Warning

Hyperf captures PHP error levels, such as notice, warning and error, and returns them to the front-end

1. register listener

Config/autoload/listeners.php is as follows

declare(strict_types=1);
/**
 * This file is part of Hyperf.
 *
 * @link     https://www.hyperf.io
 * @document https://hyperf.wiki
 * @contact  [email protected]
 * @license  https://github.com/hyperf/hyperf/blob/master/LICENSE
 */
return [
   \Hyperf\ExceptionHandler\Listener\ErrorExceptionHandler::class
];

Hyperf\exceptionhandler\listener\errorexception handler:: class, error_reporting() Error level listener.

Refer to the listener chapter on the official website https://hyperf.wiki/2.2/#/zh -cn/exception-handler

2. Register global Middleware

Now configure the middleware under config/autoload/middleware.php

<?php

declare(strict_types=1);

namespace App\Middleware\Auth;

use Psr\Container\ContainerInterface;
use Psr\Http\Message\ResponseInterface;
use Psr\Http\Server\MiddlewareInterface;
use Psr\Http\Message\ServerRequestInterface;
use Psr\Http\Server\RequestHandlerInterface;
use Hyperf\HttpServer\Contract\ResponseInterface as HttpResponse;

class FooMiddleware implements MiddlewareInterface
{
    /**
     * @var ContainerInterface
     */
    protected $container;
    /**
     * @var HttpResponse
     */
    protected $response;

    public function __construct(ContainerInterface $container, HttpResponse $response)
    {
        $this->container = $container;
        $this->response = $response;
    }

    public function process(ServerRequestInterface $request, RequestHandlerInterface $handler): ResponseInterface
    {
        try {
            return $handler->handle($request);
        } catch (\Throwable $throwable) {
            return $this->response->json(
                [
                    'code' => -1,
                    'message' => $throwable->getMessage(),
                    'data' => [
                    ],
                ]
            );
        }

    }
}

After completing the above steps, you can return PHP error prompts such as notice to the front end, and the PHP program will not continue to execute.

windows homestead vagrant up: Warning: Authentication failure. Retrying…

In windows, vagrant always prompts warning: authentication failure. Retrying… And there is no shared folder after running. It’s depressing

f:\box>vagrant up
==> default: Attempting graceful shutdown of VM...
    default: Guest communication could not be established! This is
se
    default: SSH is not running, the authentication information was
    default: or some other networking issue. Vagrant will force hal
    default: capable.
==> default: Forcing shutdown of VM...
==> default: Clearing any previously set forwarded ports...
==> default: Fixed port collision for 22 => 2222. Now on port 2200.
==> default: Clearing any previously set network interfaces...
==> default: Preparing network interfaces based on configuration...
    default: Adapter 1: nat
==> default: Forwarding ports...
    default: 22 (guest) => 2200 (host) (adapter 1)
==> default: Booting VM...
==> default: Waiting for machine to boot. This may take a few minut
    default: SSH address: 127.0.0.1:2200
    default: SSH username: vagrant
    default: SSH auth method: private key
    default: Warning: Authentication failure. Retrying...
    default: Warning: Authentication failure. Retrying...
    default: Warning: Authentication failure. Retrying...
    default: Warning: Authentication failure. Retrying...
    default: Warning: Authentication failure. Retrying...
    default: Warning: Authentication failure. Retrying...
    default: Warning: Authentication failure. Retrying...
    default: Warning: Authentication failure. Retrying...
The guest machine entered an invalid state while waiting for it
to boot. Valid states are 'starting, running'. The machine is in th
'paused' state. Please verify everything is configured
properly and try again.

If the provider you're using has a GUI that comes with it,
it is often helpful to open that and watch the machine, since the
GUI often has more helpful error messages than Vagrant can retrieve
For example, if you're using VirtualBox, run `vagrant up` while the
VirtualBox GUI is open.

The primary issue for this error is that the provider you're using
is not properly configured. This is very rarely a Vagrant issue.

solution: 

# -*- mode: ruby -*-
# vi: set ft=ruby :

# All Vagrant configuration is done below. The "2" in Vagrant.configure
# configures the configuration version (we support older styles for
# backwards compatibility). Please don't change it unless you know what
# you're doing.

Vagrant.configure("2") do |config|
  # The most common configuration options are documented and commented below.
  # For a complete reference, please see the online documentation at
  # https://docs.vagrantup.com.

  # Every Vagrant development environment requires a box. You can search for
  # boxes at https://atlas.hashicorp.com/search.
  config.vm.box = "centos71"
  
  config.vm.boot_timeout = 360
  config.ssh.username = "vagrant"
  config.ssh.password = "vagrant"

  # Disable automatic box update checking. If you disable this, then
  # boxes will only be checked for updates when the user runs
  # `vagrant box outdated`. This is not recommended.
  # config.vm.box_check_update = false

  # Create a forwarded port mapping which allows access to a specific port
  # within the machine from a port on the host machine. In the example below,
  # accessing "localhost:8080" will access port 80 on the guest machine.
  # config.vm.network "forwarded_port", guest: 80, host: 8080

  # Create a private network, which allows host-only access to the machine
  # using a specific IP.
  # config.vm.network "private_network", ip: "192.168.33.10"

  # Create a public network, which generally matched to bridged network.
  # Bridged networks make the machine appear as another physical device on
  # your network.
  # config.vm.network "public_network"

  # Share an additional folder to the guest VM. The first argument is
  # the path on the host to the actual folder. The second argument is
  # the path on the guest to mount the folder. And the optional third
  # argument is a set of non-required options.
  # config.vm.synced_folder "../data", "/vagrant_data"

  # Provider-specific configuration so you can fine-tune various
  # backing providers for Vagrant. These expose provider-specific options.
  # Example for VirtualBox:
  #
  # config.vm.provider "virtualbox" do |vb|
  #   # Display the VirtualBox GUI when booting the machine
  #   vb.gui = true
  #
  #   # Customize the amount of memory on the VM:
  #   vb.memory = "1024"
  # end
  #
  # View the documentation for the provider you are using for more
  # information on available options.

  # Define a Vagrant Push strategy for pushing to Atlas. Other push strategies
  # such as FTP and Heroku are also available. See the documentation at
  # https://docs.vagrantup.com/v2/push/atlas.html for more information.
  # config.push.define "atlas" do |push|
  #   push.app = "YOUR_ATLAS_USERNAME/YOUR_APPLICATION_NAME"
  # end

  # Enable provisioning with a shell script. Additional provisioners such as
  # Puppet, Chef, Ansible, Salt, and Docker are also available. Please see the
  # documentation for more information about their specific syntax and use.
  # config.vm.provision "shell", inline: <<-SHELL
  #   apt-get update
  #   apt-get install -y apache2
  # SHELL
end

Added two lines of code to the Vagrantfile configuration file, using the plaintext username password

config.ssh.username = “vagrant”
config.ssh.password = “vagrant”

save

vagrant reload

sucess